If it is necessary to remove the key lock assembly, use a punch to make a groove on the head of the special bolt.

Remove the 2 special bolts using a screwdriver.

Remove the key lock assembly from the steering column shaft.

When reassembling the key lock assembly, loosely install new special bolts to the steering column shaft.

Tighten the special bolt using a spanner until its head is cut off.

Remove the bolt(12mm) connecting the universal joint assembly and the steering column and shaft assembly.

Disassemble the universal joint assembly from the steering column and shaft assembly.

Reassembly is the reverse of disassembly.

Disconnect the EPS unit assembly connector.

After removing the 3 screws fixing the EPS unit assembly, disconnect the EPS unit assembly.

Resassembly is the reverse of disassembly.