10485464

1.

Disconnect the negative (-) terminal.

2.

Disconnect the generator connector and remove the "B+" terminal cable.

3.

Loosen the belt tension adjusting bolt and remove the mounting bolt.

4.

Remove the belt by pushing the generator inward.

5.

Remove the generator assembly.

6.

Installation is the reverse of removal.

note

1.

Position the generator and insert the support bolt. (Do not attach the nut)

2.

Push the generator forward and determine how many spacers (thickness : 0.198 mm) should be inserted between the front leg of the generator and the front case. (space "A" in the illustration)

(There should be enough spacers so that they do not fall out when you let go of them.)

3.

Insert the spacers (space "A" in the illustration), attach the nut, and complete the installation.