2.
Loosen the adjusting nut and detach the parking brake cable.
Remove the console.
Loosen the adjusting nut and detach the parking brake cable.
Detach the parking brake switch assembly.
Remove the parking brake lever assembly.
Remove the rear wheel.
Remove the brake drum.
Remove the rear hub assembly.
Remove the brake shoe.
Disconnect the parking brake cable from the brake shoe operating lever.
Remove the parking brake cable retaining ring in the rear of the backing plate.
Loosen the parking brake cable clamp and remove the parking brake cable assembly.
The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure.
Remove the console.(Refer to body group-console.)
Loosen the adjusting nut (A) and the parking brake cables.
Disconnect the connector (A) of parking brake switch.
Remove the parking brake lever assembly (A) with loosening the bolts (B).
Remove the wheel and tire.
Remove the brake disc(A).
Remove the rear hub unit bearing(A).
Remove the shoe hold down pin (A) and the spring (B) by pushing the retainer spring and turning the pin.
Remove the adjuster assembly (A) and the return spring (B).
Remove the parking brake cable (B) from the brake shoe (A).
Remove the strut (A) and the strut spring (B).
Remove the brake shoe.
