1.
Apply the specified grease to the clutch pedal and bushings.
Chassis grease: SAE J310a, NLGI No.1
Apply the specified grease to the clutch pedal and bushings.
Chassis grease: SAE J310a, NLGI No.1
Install the clutch pedal mounting nut(A).
TORQUE
1) Pedal support member :
15-22Nm (150-220kgf.cm, 11-16Ib-ft)
2) Master cylinder : 10-17Nm (100-170kgf.cm, 6-13Ib-ft)
Install the push rod to the clutch pedal.
Apply the specified grease to the clevis pin and washer.
Wheel bearing grease: SAE J310, NLGI No.2
Measure the clutch pedal height(from the face of the pedal pad to the floorboard) and the clutch pedal play (measured at the face pedal pad).
Standard value
(A) 6 ~ 12 mm (0.24 ~ 0.47 in)
(B) 160.7 mm (6.33 in)
