1.
Support the specified portion of the vehicle with a lift.
Support the specified portion of the vehicle with a lift.
Drain the power steering fluid.
Remove the front tires (RH/LH).
After removing the split pin, disconnect the tie rod from the knuckle by using the special tool.
Disconnect the steering shaft assembly from the gear box inside the passenger compartment.
Keep the neutral-range to prevent the damage of the clock spring inner cable when you handlethe steering wheel.
Raise up the vehicle.
Loosen the power steering pressure tube mounting clamp and return tube mounting clamp mounting bolt.
Disconnect the front muffler assembly.
Disconnect the transaxle rear mounting bracket.
After supporting the crossmember with a transaxle jack, remove the 4 bolts fixing the crossmember.
Disconnect the pressure tube and return tube lifting from the power steering gear box.
Remove the power steering gear box mounting bolt and clamp.
Separate the power steering gear box assembly by pulling it toward the rights side of the vehicle.
