2.
Remove the brake hose fixing bracket.
note
The brake hose should not expand when the rear torsion axle beam is hanged down from the body.
Remove the wheel and tire.
Remove the brake hose fixing bracket.
The brake hose should not expand when the rear torsion axle beam is hanged down from the body.
After placing a jack at the bottom of the rear torsion axle beam, remove the rear shock absorber lower mounting bolt.
Remove the rear torsion axle beam and three body fixing bracket bolts.
Remove the rear coil spring.
The end of the rear coil spring should be inserted into the groove of the coil spring upper pad.
Insert the lower pad into the coil spring.
Fix the rear torsion axle beam bracket on the body, after placing the coil spring at its previous location and lifting the vehicle with a jack.
Fix the rear shock absorber.
Chcek the coil spring for crack and deformation.
Check the coil spring pad for damage and deformation.
