5.
Does change of sensor power supply occur as connecting sensor connector?
YES
a.
Replace AFS or APS.
NO
a.
Go to "Verification of Vehicle Repair".
IG KEY "OFF", ENGINE "OFF".
Disconnect AFS connector(C215) and APS connector(C202).
Check that sensor connector power supply is within the specification after turning IG KEY "ON".
Connect AFS connector and APS connector in turn.
Specification : sensor power supply should not change as connecting AFS connector and APS connector.
( If the change of sensor power supply occur as connecting sensor connector, this means the occurrence of short inside of sensor.)
Does change of sensor power supply occur as connecting sensor connector?
YES
Replace AFS or APS.
NO
Go to "Verification of Vehicle Repair".
