REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR)
1.

Preparation

(1)

Fold the rear seat (Refer to "BD" group in this WORKSHOP MANUAL)/

(2)

Remove the service cover (A).

(3)

Disconnect the fuel pump connector (A).

(4)

Start the engine and wait until fuel in fuel line is exhausted.

(5)

After engine stalls, turn the ignition switch to OFF position.

2.

Disconnect the fuel feed hose quick-connector (A) and canister hose (B).

3.

Unscrew the fuel pump mounting bolts (C) and remove the fuel pump assembly.

INSTALLATION

Install the Fuel Pump acording to the reverse order of REMOVAL procedure.

Tightening Torques

Fuel pump installation bolts/nuts: 2.0 ~ 2.9N·m (0.2 ~ 0.3kg·m, 1.4 ~ 2.2lb·ft)

Яндекс.Метрика