2.
Remove the screws holding the front door trim panel then carefully remove it with a flat-tip screwdriver.
note
When prying with a flat-tip screwdriver, wrap it with a shop towel to protect the painting surface.
Remove the screw holding the inner handle and disconnect the inner handle rod and lock rod, then remove the inner handle.
Remove the screws holding the front door trim panel then carefully remove it with a flat-tip screwdriver.
When prying with a flat-tip screwdriver, wrap it with a shop towel to protect the painting surface.
Remove the 4 screws and disconnect the wire connector, then remove the front speaker.
Installation is the reverse of removal.
Remove the screw holding the inner handle and disconnect the inner handle rod and lock rod, then remove the inner handle.
Remove the screws holding the rear door trim panel then carefully remove it with a flat-tip screwdriver.
When prying with a flat-tip screwdriver, wrap it with a shop towel to protect the painting surface.
Remove the 4 screws and disconnect the wire connector, then remove the rear speaker.
Installation is the reverse of removal.
Check the speaker with an ohmmeter. If an ohmmeter indicates the correct impedanceof the speaker when checking between the speaker (+) and speaker (-) of thesame channel, the speaker is ok.
If a clicking sound is emitted from the speaker when the ohmmeter is connectedto the speaker terminals, the speaker is ok.
