Inspection
Relay Inspection
1.

Check the relays are fixed strongly in each module.

2.

Check if the relays are proper type.

Front Fog Lamp Switch Inspection
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front fog lamp switch (A) by pulling it at the behind side of the crash pad lower pad.

3.

Replace new front fog lamp switch and Check the operation.

Replacement
Front Fog Lamp
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front bumper.

(Refer to the BD group - "Front bumper")

3.

Disconnect the front fog lamp connector (A).

4.

Remove the front fog lamp (B) from the front bumper after loosening 4 screws.

5.

Installation is the reverse of removal.

Front Fog Lamp Bulb
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front bumper.

(Refer to the BD group - "Front bumper")

3.

Disconnect the front fog lamp connector (A).

4.

Remove the bulb (C) from the front fog lamp assembly (B) after turning it counterclockwise.

5.

Replace new bulb (C).

Яндекс.Метрика