Remove the lower arm bushing mounting bolts.

Remove the front exhaust pipe.

Remove the rear roll rod bracket.

To make it easier to remove the crossmember, remove steering gear box mounting bolts and stabilizer link mounting nuts and then support the steering gear and linkage on the vehicle.

After support the center of the crossmember assembly with a jack, remove the crossmember mounting bolts to the body. Remove the crossmember.

Install the crossmember while supporting it with a jack.

Install steering gear box assembly and stabilizer bar link to the vehicle.

Install lower arm bushing mounting bolts and nuts.

Install the rear roll rod bracket.

Install the front exhaust pipe.

Check the crossmember for cracks or deformation.

Check each insulator and bushing for cracks or deterioration.