Component Location
General Description

AHLS provides driver with the best visibility by adjusting vertical direction of the headlamp. It consists of ECM, Linkage and actuator. ECM ouputs the singal based on the driving and loading condition and delivers it to actuator, and then the actuator changes vertical direction of the headlamp .

DTC Description

The system monitors control voltage , and sets DTC C2226 if a deviation of more than the fault threshold is detected for 2 seconds.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

● Voltage check

● Poor connection

● Short circuit to chasis ground and battery

Detecting mode

● every 100ms

Enable condition

● 15%up to 80% of battery voltage

Threshold value

● Deviation of output voltage from setpoint ＞ output fault threshold

Detecting time

● 2 Sec

Schematic Diagram
Яндекс.Метрика