Continuing to calculate data of several sensor despite turning ignition OFF, when ignition turns ON, PCM enables turning ignition ON to be easy using calculated data.
If abnormal counterdown is detected for a calibratable time, PCM sets P2610. And then MIL(Malfunction Indication Lamp) turns on when the malfunction lasts till consecutive 2 driving cycle.
ITEM | Detecting Condition | Possible Cause | |
DTC Strategy | Case 1 | ● Compares the time elapsed recorded by the LPC(Low Power Counter) against that recorded by the test timer | ● PCM |
Case 2 | ● Checks for abnormal resets of the LPC | ||
Enable Condition | Case 1 | ● Engine running > 10sec. ● Battery voltage > 8V | |
Case 2 | ● No Memory Failure Occurred | ||
Threshold value | Case 1 | ● The difference between the counter the LPC and the calibration the test timer clocks up > 20sec. | |
Case 2 | ● The LPC is reset to zero abnormally | ||
Diagnosis Time | - | ||
MIL On Condition | ● 2 Driving Cycle |
