1.
Disconnect the negative (-) terminal(A) from the battery.
Disconnect the negative (-) terminal(A) from the battery.
Loosen the tapping screws and lift up the horn pad and remove it.
Remove the lock nut and the washer.
Before doing these procedures, see the SRS section (RT Group. Only for vehicle equipped with SRS).
Remove the steering wheel with (09561-11001).
Do not hammer on the steering wheel to remove it may cause the damage to the collapsible mechanism.
Remove the lower cover.
Remove the steering column lower and upper shrouds.
Disconnect the connectors and remove the multifunction switch.
Remove the bolts securing the coupling and universal joint. Pull out the universal joint from the gear box.
Keep the neutral-range to prevent the damage of the clock spring inner cable when you handlethe steering wheel.
Remove the dust cover mounting bolts.
Remove the steering column mounting bolts (4bolts).
Remove the steering column and shaft with the universal joint and cover.
