1.
Install the bushing(B) on the stabilizer bar(A).
note
Bring clamp(C) of stabilizer bar(A) into contact with bushing(B).
Install the bushing(B) on the stabilizer bar(A).
Bring clamp(C) of stabilizer bar(A) into contact with bushing(B).
Install the bracket on the bushing(B).
After tightening the bolts of the bushing bracket temporarily, install the bushing bracket on the opposite side.
Install the stabilizer bar bracket mounting bolts(A) to the sub frame.
Tightening torque Nm (kgf·m, lb-ft) :
45 ~ 55 (4.5 ~ 5.5, 32.5 ~ 39.8)
After lifting the jack which supports the sub frame, install the eight bolts and nuts of the sub frame.
Tightening torque Nm (kgf·m, lb-ft) :
140 ~ 160 (14 ~ 16, 101.2 ~ 115.7)
Install the engine mounting bolts(A,B)
Tightening torque Nm (kgf·m, lb-ft) :
50 ~ 65 (5 ~ 6.5, 36.2 ~ 47.0)
Install the connecting bolt(A) between the steering universal joint assembly and the pinion assembly.
Tightening torque Nm (kgf·m, lb-ft) :
15 ~ 20 (1.5 ~ 2.0, 10.8 ~ 14.5)
Install both sides of the connecting bolts(A) between the lower arm and the fork.
Tightening torque Nm (kgf·m, lb-ft) :
140 ~ 160 (14 ~ 16, 101.2 ~ 115.7)
Be careful not to damage to the aluminium lower arm.
Install both sides of the lower arm mounting bolts(A).
Tightening torque Nm (kgf·m, lb-ft) :
100 ~ 120 (10 ~ 12, 72.3 ~ 86.8)
Install both sides of the tie rod end self-locking nuts(A).
Tightening torque Nm (kgf·m, lb-ft) :
50 ~ 55 (5 ~ 5.5, 36.2 ~ 39.8)
Install the stabilizer link(B) to the fork(A).
Tightening torque Nm (kgf·m, lb-ft) :
100 ~ 120 (10 ~ 12, 72.3 ~ 86.8)
Install the wheel and the tire(A) to the front hub(B).
Tightening torque Nm (kgf·m, lb-ft) :
90 ~ 110 (9 ~ 11, 65.1 ~ 79.5)
Be careful not to damage the hub bolts(C) when installing the front wheel and tire(A).
