Install the brake shoe(A) to the backing plate(B).

Connect the parking brake wire to the brake shoe.

After installing the strut assembly(A), install the adjuster assembly(B) and the lower return spring(C).

While pressing the spring, install the brake shoe hold down pin(A) and spring(B).

Grease where it is necessary.

Install the rear axle hub(A) and the brake disk(Refer to DS Gr. 'Rear axle').

Install the rear wheel and tire to the rear hub.

Tighten the parking brake adjusting nut.

Install the floor console (Refer to BD Gr. 'Console').

Install the parking brake mounting bolt(A) and the wire(B).