Monitor Scantool Data
1.

Connect scantool to Data Link Connector (DLC).

2.

IG KEY "ON"

3.

Check the DTC on the Engine system with scantool

4.

Check the DTC related injectors on ECM

a.

Specification : DTC related injectors should not be set.

5.

Is there any DTC related injectors ?

YES

a.

Refer to "DTC" guide corresponding to each problem occurred injector.

NO

a.

Go to "Verification of Vehicle Repair".

b.

Injector #1 related problem : Refer to P0201for open in injector circuit. Refer to P0262 for short in injectoer circuit.

Injector #2 related problem : Refer to P0202 for open in injector circuit. Refer to P0265 for short in injectoer circuit.

Injector #3 related problem : Refer to P0203 for open in injector circuit. Refer to P0268 for short in injectoer circuit.

Injector #4 related problem : Refer to P0204 for open in injector circuit. Refer to P0271 for short in injectoer circuit.

Яндекс.Метрика