The Electronic Throttle Control(ETC) system is made of the components throttle body, Throttle Position Sensor(TPS) 1&2 and Accelerator Position Sensor(APS) 1&2. The APS is mounted in the accelerator pedal to detect the opening angle of the accelerator pedal. It has 2 sensors to detect the accelerator position and a malfunction of the accelerator position sensor. The PCM judges the current opening angle of the accelerator pedal from APS1&2, and the PCM controls the throttle motor based on these signals.
Checking output signals from APS 1 under detecting condition, if output signals are below the threshold, PCM sets P2122. MIL(Malfunction Indication Lamp) turns on when the malfunction lasts till 1 driving cycle.
Item | Detecting Condition | Possible Cause |
DTC Strategy | ● This code detects a continuous short to ground or open in either the circuit or the sensor (0-100%) | ● Poor connection ● Open or short to ground in Power circuit ● Open or short to ground in Signal Circuit ● Faulty APS ● Faulty PCM |
EnableConditions | ● Ignition "ON" | |
Threshold Value | ● APS1 < 0.125V | |
Diagnosis Time | ● Contineous (More than 0.18 sec. Failure for every 7.8 sec. Test) | |
MIL On Condition | ● 1 Driving Cycle |
Pedal Position | Output Voltage(V) [Vref = 5.0V] | |
APS1 | APS2 | |
C.T | 0.7 ~ 0.8V | 0.275 ~ 0.475V |
W.O.T | 3.8 ~ 4.4V | 1.75 ~ 2.35V |
