REPLACEMENT
caution
●

In the case of the vehicle equipped with immobilizer, perform "KEY TEACHING" procedure together (Refer to "IMMOBILIZER" in BE group).

1.

Turn ignition switch OFF and disconnect the negative (-) battery cable.

2.

Disconnect the PCM connector (A).

3.

Unscrew four PCM mounting bolts and then remove the PCM (B).

4.

Install a new PCM.

PCM installation bolts : 9.8 ~ 11.8 N·m (1.0 ~ 1.2 kgf·m, 7.2 ~ 8.7 lbf·ft)

5.

Perform "Key Teaching" procedure (Refer to "IMMOBILIZER" in BE group).

Яндекс.Метрика