1.
Preparation
(1)
Remove the Service Cover (A) in the trunk.
(2)
Disconnect the Fuel Pump Connector (A).
(3)
Start the engine and wait until fuel in fuel line is exhausted.
(4)
After the engine stalls, turn the ignition switch OFF.
Preparation
Remove the Service Cover (A) in the trunk.
Disconnect the Fuel Pump Connector (A).
Start the engine and wait until fuel in fuel line is exhausted.
After the engine stalls, turn the ignition switch OFF.
Disconnect the Fuel Feed Quick-Connector (A) and the Connector (B).
Lift the vehicle.
Remove the center and main mufflers (Refer to the group "EM").
Support the fuel tank with a jack and remove the Fuel Tank band (A).
Disconnect the Fuel Feed Hose (A), Leveling Hose (B) and Canister Ventilation Hose (C).
With moving the jack down slowly, remove the Fuel Tank from the vehicle.
Install the Fuel Tank according to the reverse order of "REMOVAL" procedure.
Tightening Torque
39.2 ~ 53.9 N·m (40. ~ 5.5 kgf·m, 28.9 ~ 39.8 lbf·ft)
