1.
Remove the SFJ boot band and pull the boot from SFJ outer race.
note
Be careful not to damage it.
Do not disassemble the BJ assembly.
The Driveshaft joint uses special grease. Do not subtitute with another type of grease.
The Boot band should be replaced with a new one.
Remove the SFJ boot band and pull the boot from SFJ outer race.
Be careful not to damage it.
Remove the circlip using a screwdriver.
(ASAN) KOREA
Remove the driveshaft from SFJ outer race.
Remove the snap ring and disassemble the spider assembly from the shaft.
Clean the spider assembly.
Remove the BJ boot band and removal of the SFJ boot and the BJ boot.
If the boot is reused, wrap a tape around the driveshaft splines to protect the boot.
Remove both side of bands(B, C) of the dunamic damper(A).
Fix the drive shaft(A) with a vice(B) as illustrated.
Apply soapy water to the shaft to prevent being damaged between the shaftspline and the dynamic damper when the dynamic damper is removed.
Separate dynamic damper(A) from the shaft(B) carefully.
