Install the intake manifold assembly with a new gasket to a cylinder head assembly. Tighten the bolts in two steps.
Tightening torque
Step 1 (a~h) :
3.9 ~ 5.9Nm (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)
Step 2 (1~8) :
18.6 ~ 23.5Nm (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)
When installing the gasket on the cylinder head, check the indentification marks(LH/RH) to ensure proper installation.
Install the delivery pipe.
Connect the LH injector connector.
Install the surge tank.
Tightening torque
18.6~23.5Nm(1.9~2.4kgf.m, 13.7~17.4lb-ft)
Install the surge tank mounting bracket.
Tightening torque
18.6~23.5Nm(1.9~2.4kgf.m, 13.7~17.4lb-ft)
Install the Electronic Throttle Control(ETC) system fixing bracket.
Connect the hoses and connectors.
Install the air cleaner assembly.
Install the engine cover.
