2.
Remove the crash pad lower panel (A). Avoid damaging retaining clip. (Refer to the Body group - crash pad)
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel (A). Avoid damaging retaining clip. (Refer to the Body group - crash pad)
Remove ICM relay connector and 2 nuts.
Remove the body control module (A) and tilt ＆ telescope unit after loosening 2 nuts and disconnecting connector.
Remove the body control module (B) from the tilt ＆ telescope unit (A) after loosening a bolt.
Installation is the reverse of removal.
