3.
Disconnect the 10P connector from the switch.
Rear left/right power window relay
Disconnect the negative (-) battery terminal.
Remove the rear door trim panel. (Refer to the Body group - rear door)
Disconnect the 10P connector from the switch.
Check for continuity between the terminals.
There should be continuity between the No.3 and No.4 terminals when power and ground are connected to the No.6 and No.10 terminals.
There should be no continuity between the No.3 and No.4 terminals when power is disconnected.
Check for continuity between the terminals.
There should be continuity between the No.1 and No.4 terminal when power and ground are connected to the No.5 terminal and No.6 terminal.
There should be no continuity between the No.1 terminal and No.4 terminal when power is disconnected.
