System Inspection
1.

Check blocking of intake system

(1)

Visually/physically inspect the blocking in intake system for following items

▶ Throttle body gasket and damage

▶ Clogging of Air cleaner

▶ Blocking in intake manifold and injector caused by any foreign substance

(2)

Has a problem found?

YES

▶ Repair or replace it, and go to "Verification of Vehicle Repair" procedure.

NO

▶ Go to " Check fuel pressure" as follows.

2.

Check fuel pressure

caution

Be cautious that Fuel is explosive and an empty fuel tank can still contain explosive gases.When working on fuel system make sure to supply adequate ventilation to the work area. Do not smoke, and keep sparks and open flames away.

The fuel system remains under pressure when the engine is not running. Release fuel systempressure before disconnecting any fuel line to reduce the chance of presonal injury orfire damage to vehicle components.

(1)

Refer to "Fuel Pressure Test" in Fuel Delivery System.

Condition

Possible Cause

Suspected area

Fuel pressure too low

Clogged fuel filter

Fuel filter

Fuel leak on the fuel-pressure regulator that is assembled on fuel pump because of poor seating of the fuel-pressure regulator

Fuel pressure regulator

Fuel pressure too high

Sticking fuel pressure regulator

Fuel pressure regulator

Fuel pressure drops slowly after engine is stopped

Injector leak

Injector

Fuel pressure drops immediately after engine is stopped

The check valve within the fuel pump is open

Fuel pump

3.

Check fuel leakage in injector

(1)

IG "OFF" after checking the fuel pressure test.

(2)

Stop engine and check for a change in the fuel pressure gauge reading for 5 minutes.

Specification : After engine stops, fuel gauge reading is maintained for 5 minutes.

(3)

Is the fuel gauge reading within specification?

YES

▶ Go to "Component Inspection" procedure.

NO

▶ There is a fuel leakage in injector. Repair or replace it, and go to " Verification of Vehicle Repair" procedure.

Яндекс.Метрика