Component Location
General Description

The ESP is a system to stabilize a car in an emergency (kine of under steering or over steering) by supplying appropriate wheel with braking pressure according to signal of yaw&G sensor, SAS, WSS, pressure sensor. ESP system help to escape from facing in an accident.

DTC Description

Under normal conditions, the inlet valves of all four wheels are not closed during control for longer than 1,28s or If the controller requests pressure-hold or pressure-decrease for longer than 1,28s, a fault is detected. The ABS/ESP warning ramp is turned ON and the EBD warning ramp is turned OFF.

DTC Detecting Condition

Item

Detecting Condition

Possible cause

DTC Strategy

● Signal monitoring

● Faulty HECU

Case1

Monitoring Period

● Continuous

Enable Conditions

● If the controller requests pressure-hold or pressure-decrease for longer than 1,28s, a fault is stored.

Case2

Monitoring Period

● Continuous (at vehicle reference speed > 6m/s, no detected under voltage and a fault is not already detected)

Enable Conditions

● The monitoring reports a failure if continuous ESP control occurs for a time period >= 10 s.

Fail Safe

● The ABS/ESP functions are inhibited, allow the EBD control.

● The ABS/ESP warning lamps are activated.

Яндекс.Метрика