1.
Remove the bolts from the oil pump body, and then remove the suction pipe and O-ring.
Remove the bolts from the oil pump body, and then remove the suction pipe and O-ring.
Remove the power steering oil pump rear cover(A) and the O-ring(B) by removingthe four bolts.
Remove the cam ring.
Remove the cam ring.
Remove the rotor and vanes.
Remove the oil pump side plate.
Remove the inner O-ring and outer O-ring.
Remove the pulley and the shaft(A).
Remove the oil seal from the oil pump body.
Remove the connector from the oil pump body, and take out the flow control valve and the flow control spring.
Remove the O-ring from the connector.
Do not disassemble the flow control valve.
