1.
Install the oil temperature sensor(A) and connect the sensor connector.
caution
When connecting the oil temperature connector, check the connector for rust, dirt, or oil, then reconnect it.
Install the oil temperature sensor(A) and connect the sensor connector.
When connecting the oil temperature connector, check the connector for rust, dirt, or oil, then reconnect it.
Continue to apply liquid gasket at application points at the oil pan with Ø0.098in(2.5mm) thickness.
Liquid gasket Part name : Threebond 1281B
Tighten the mounting bolt with the specified torque after installing the oil pan.
TORQUE:
10~12Nm(1.0~1.2kgf.m, 7~8lb-ft)
Install the drain plug.
TORQUE :
35~45Nm(3.5~4.5kgf.m, 25~32lb-ft)
Installation is the reverse of the removal.
