4.
Disconnect the three connectors (A) from the TCM placed in the right side of the blower motor.
Ignition off.
Disconnect the cable from (-) terminal of the battery.
Remove the lower cover under the glove box.
Disconnect the three connectors (A) from the TCM placed in the right side of the blower motor.
Remove the bolt and the nut and pull the TCM (B) down.
The upper part of the support bracket is inserted into the body hole.
Be careful not to damage the support bracket.
Install a new TCM in reverse order of removal.
Bracket mounting bolt and nut:
8-12Nm (0.8-1.2kgf.m, 5.79-8.68lb-ft)
