2.
Remove the sub fuel sender service cover (A) in the trunk.
Release the residual pressure in fuel line (Refer to "Release Residual Pressure in Fuel Line" in this group).
Remove the sub fuel sender service cover (A) in the trunk.
Disconnect the sub fuel sender connector (A).
Disconnect the suction tube quick-connector (B).
Remove the installation bolt (C), and then remove the sub fuel sender from the fuel tank.
Installation is the reverse of removal.
Sup Fuel Sender installation bolt :
2.0 ~ 2.9 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft)
When installing the sub fuel sender, be careful not to get the seal-ring entangled.
