3.
Remove the Front Impact Sensor(RH) mounting bolt.
note
Remove the intake air duct, then loosen the FIS mounting bolt to remove Front Impact Sensor.(LH)
Removal of the airbag must be performed according to the precautions/ procedures described previously.
Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
Disconnect the Front Impact Sesnsor(RH) connector.
Remove the Front Impact Sensor(RH) mounting bolt.
Remove the intake air duct, then loosen the FIS mounting bolt to remove Front Impact Sensor.(LH)
Remove the Front Impact Sensor.
