Component Location
General Description

DDM is a node of CAN communication system which consists of BCM, Seat ECU, Tilt ECU, ADM. Main function of DDM is lock/unlock of door and window, adjusting position and fold/unfold of outsidemirror. Outside mirror module consists of motor and position sensor. According to Outside mirror Switch signal, Outside mirror motor adjusts position of mirror and position sensor delivers result to DDM by voltage value

DTC Description

The ECM sets DTC B1911 if signal voltage of left outsidemirror vertical sensor is out of range

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

● Check Voltage

● Open or short in signal harness.

● Open or short in power harness.

● Faulty outside mirror s/w.

● Faulty outside mirror motor.

● Faulty outside mirror sensor.

Enable Conditions

● IGN ‘ON’ & Engine ‘OFF’

Threshold value

● 1V< Output voltage <3.5V

Detecting time

FAIL SAFE

-

Specification

※ Output voltage of outsidemirror sensor as a function of horizental position of outside mirror.

Schematic Diagram
note
To view Flash content, you need to install the appropriate browser extension
Яндекс.Метрика