For checking procedures for each problem, refer to the flow-chart type of troubleshooting guide on the following page.
DTC | Trouble | Condition | Measure time | Disposal | |
C1101 | Voltage over | IG[V] ＞ 17V | 1sec | Solenoid control stop | 10V ＜ IG[V] ＜ 16V |
C1102 | Voltage under | IG[V] ＞ 8V | 1sec | Solenoid control stop | 10V ＜ IG[V] ＜ 16V |
C1212 | Vehicle speed sensor | TPS ＞ 30% over and vehiclespeed 0km/h | 60sec | Vehicle speed : 80km/h | Vehicle speed ＞ 5km/h |
C1604 | ECU error | EEPROM Read/Write fail andPWM management error | 1sec | Solenoid control stop | IGN ON/OFF |
C2230 | Solenoid current error | Measure voltage ＞ 1.28A | 1sec | Solenoid control stop | Power ON reset |
Solenoid disconnection | 1sec | ||||
Target voltage-Measuervoltage ＞ 0.2A and IG[V] ＞ 13V | 2sec |
