10471398-10471399

Remove the in car sensor connector.

Blow air with changing temperature to the in car sensor air inlet. Measure sensor resistance between 2 and 4 terminals.

In car sensor is negative type thermistor that resistance will rise with lower temperature, and reduce with higher temperature.

Specification

Temperature [℃(℉)]

Resistance between terminals 2and 4 (㏀)

50 (122)

35 (95)

25 (77)

15 (59)

0 (32)

-15 (-74.2)

10.81 ± 2.2%

19.57 ± 1.6%

30.00 ± 1.20%

47.13 ± 1.7%

97.71 ± 2.4%

216.1 ± 3.2%

note

In car sensor is negative type thermistor that resistance will rise with lower temperature, and reduce with higher temperature.

Disconnect the negative (-) battery terminal.

Remove the center facia panel. (Refer to BD group).

Loosen the mounting 2 screws and then remove the in-car sensor (B).

Installation is the reverse order of removal.