Connect a scantool on the Data Link Connector (DLC).
Turn the ignition switch ON.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer to “Specification”
Turn ignition switch OFF and disconnect the scantool from the DLC.
Disconnect APS connector.
Measure resistance between the APS terminals 4 and 5 (APS 1).
Specification: Refer to “Specification”
Measure resistance between the APS terminals 1 and 6 (APS 2).
Specification: Refer to “Specification”
