2.
Remove the fuel pump service cover (A) in the trunk.
Release the residual pressure in fuel line (Refer to "Release Residual Pressure in Fuel Line" in this group).
Remove the fuel pump service cover (A) in the trunk.
Disconnect the fuel pump connector (A).
Disconnect the fuel feed tube quick-connector (B), the suction tube quick-connector (C), and the connector (D).
Remove the installation bolt (E), and then remove the fuel pump from the fuel tank.
Installation is the reverse of removal.
Fuel pump installation bolt :
2.0 ~ 2.9 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft)
When installing the fuel pump module, be careful not to get the seal-ring entangled.
