IG "OFF" and disconnect OTS connector.
Measure resistance between signal and ground terminals of OTS connector after checking out the temperature of EOTS with scantool.(Component Side)
Temperature(℃/℉) | Resistance(kΩ) |
-40℃ | 52.15㏀ |
-20℃ | 16.52㏀ |
0℃ | 6.0㏀ |
20℃ | 2.45㏀ |
40℃ | 1.11㏀ |
60℃ | 0.54㏀ |
80℃ | 0.29㏀ |
Is the measured resistance within specification ?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Substitute with a known - good OTS and check for proper operation. If the problem is corrected, replace OTS and go to "Verification of Vehicle Repair" procedure. |
