3.
Selet "Currnet Data"mode and monitor "Oil temperature sensor" parameter.
Specification : Increasing Gradually
Fig 1) Normal Data
Fig 2) Open Data
Connect GDS to Data Link Connector(DLC).
Ignition "ON" & Engine "ON".
Selet "Currnet Data"mode and monitor "Oil temperature sensor" parameter.
Specification : Increasing Gradually
Fig 1) Normal Data
Fig 2) Open Data
Is the Oil temperature sensor within specification?
 | ▶ Fault is intermittent caused by poor contact of PCM/TCM and DTC was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair as necessary and go to "Verification Vehicle Repair" procedure. |
 | ▶ Go to "Terminal and Connector Inspection" procedure. |
