Inspection

Rear left/right power window relay

1.

Disconnect the negative (-) battery terminal.

2.

Remove the rear door trim panel.

(Refer to the BD group - "Rear door")

3.

Disconnect the 10P connector from the switch.

Rear Power Window Switch Up

Check for continuity between the terminals.

1.

There should be continuity between the No.3 and No.4 terminals when power and ground are connected to the No.6 and No.10 terminals.

2.

There should be no continuity between the No.3 and No.4 terminals when power is disconnected.

Rear Power Window Switch Down

Check for continuity between the terminals.

1.

There should be continuity between the No.1 and No.4 terminal when power and ground are connected to the No.5 terminal and No.6 terminal.

2.

There should be no continuity between the No.1 terminal and No.4 terminal when power is disconnected.

Яндекс.Метрика