Remove the head lamp leveling unit linkage (A) from trailing arm (B).

Loosen the mounting bolts of automatic head lamp levelling unit assembly (A).

Remove the head lamp leveling unit (A) from the bracket (B) after loosening 2 screws.

Installation is the reverse of removal.

Disconnect the negative (-) battery terminal.

Remove the head lamp assembly (Refer to the head lamp).

Remove the head lamp leveling actuator (A) by loosening the adjusting bolt (B) after rotating it to an arrow direction.

Installation is the reverse of removal procedure.

Ignition "ON".

Turn on the head lamp switch.

Check for operation. If the aim of the head lamps changes smoothly when the head lamp leveling switch is turned.

If the operation does not work well, inspect the connector and terminals to be sure they are all making good contact.

If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

If the terminals look OK, go to step 5.

Substitute with a known-good head lamp assembly and check for proper operation.