2.
Remove the sub fuel sender service cover (A).
Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group).
Remove the sub fuel sender service cover (A).
Disconnect the sub fuel sender connector (A).
Disconnect the vapor tube quick-connector (B).
Remove the installation bolts (C), and then remove the sub fuel sender from the fuel tank.
Installation is reverse of removal.
Sub fuel sender installation bolt:
2.0 ~ 2.9 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft)
