2.
To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).
Drain the engine coolant.
System is under high pressure when the engine is hot. To avoid danger of releasing scalding engine coolant, remove the cap only when the engine is cool.
To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).
Remove the water pump pulley (A).
Remove the water pump (A) and the gaskets (B).
Drain the engine coolant.
Remove the air cleaner assembly.
Remove the radiator upper hose (A) and the lower hose (B).
Disconnect the WTS & gauge unit connector (A).
Disconnect the heater hoses (A) and the theottle body coolant hoses (B).
Remove the wiring protector.
Remove the water temperature control assembly (A).
