1.
Install the oil pump (A).
Tightening torque
20.6 ~ 22.6Nm (2.1 ~ 2.3kgf.m, 15.2 ~ 16.6lb-ft)
note
Always use a new O-ring(B).
Install the oil pump (A).
Tightening torque
20.6 ~ 22.6Nm (2.1 ~ 2.3kgf.m, 15.2 ~ 16.6lb-ft)
Always use a new O-ring(B).
Install oil pump sprocket (A) and the oil pump chain on the oil pump.
Tightening torque
18.6 ~ 21.6Nm (1.9 ~ 2.2kgf.m, 13.7 ~ 15.9lb-ft)
Install the oil pump chain cover (A).
Tightening torque
9.8 ~ 11.7Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Install the lower oil pan.
Using a gasket scraper, remove all the old packing material from the gasket surfaces.
Before assembling the oil pan, the liquid sealant TB1217H should be applied on upper oil pan.
The part must be assembled within 5 minutes after the sealant was applied.
Bead width : 2.5mm(0.1in.)
But marked area(＊) to be 5.0mm(0.2in.)
Clean the sealing face before assembling two parts.
Remove harmful foreign materials on the sealing face before applying sealant
When applying sealant gasket, sealant must not be protrude into the inside of oil pan.
To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.
Install lower oil pan.
Uniformly tighten the bolts in several passes.
Tightening torque
9.80 ~ 11.76Nm (1.0 ~ 1.2kgf.m, 7.23 ~ 8.68lb-ft)
After assembly, wait at least 30 minutes before filling the engine with oil.
