2.
Remove drive belt(A).
Drain the engine coolant.
System is under high pressure when the engine is hot. To avoid danger of releasing scalding engine coolant, remove the cap only when the engine is cool.
Remove drive belt(A).
Remove the timing belt.
Remove the water pump(A) and gasket(B).
Drain the engine coolant.
Remove the air cleaner assembly.
Disconnect the radiator upper and lower hose(A, B).
Disconnect the Engine Coolant Temperature(ECT) sensor connector.
Remove the coolant hose related to the heater hoses and the Engine Coolant Temperature(ECT) system.
Remove wiring protector.
Remove water temperature control assembly(A) and the gaskets(B).
Remove the water pipe(A).
