1.
Install the bushing(B) on the stabilizer bar(A).
note
Bring clamp(C) of stabilizer bar(A) into contact with bushing(B).
Install the bushing(B) on the stabilizer bar(A).
Bring clamp(C) of stabilizer bar(A) into contact with bushing(B).
One side bracket should be temporarily tightened, and then install the bushing on the opposite side.
Install the stabilizer bracket bolt(B).
Tightening torque Nm (kgf·m, lb-ft) :
45 ~ 55 (4.5 ~ 5.5, 32.5 ~ 39.8)
Install the stabilizer link mounting nut(A).
Tightening torque Nm (kgf·m, lb-ft) :
35 ~ 45 (3.5 ~ 4.5, 25.3 ~ 32.5)
Repeat step 3 and 4 for the other side.
Install the wheel and the tire(A) to the rear hub(B).
Tightening torque Nm (kgf·m, lb-ft) :
90 ~ 110 (9 ~ 11, 65.1 ~ 79.5)
Be careful not to damage the hub bolts(C) when installing the rear wheel and tire(A).
