1.
Remove the front door scuff trim (A).
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
Remove the front door scuff trim (A).
Installation is the reverse of removal.
Replace any damage clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
Remove the front pillar trim (A).
Installation is the reverse of removal.
Replace any damage clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
Remove the rear door scuff trim (A).
Installation is the reverse of removal.
Replace any damage clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
Remove the front door scuff trim.
Remove the cowl side trim (A).
Installation is the reverse of removal.
Replace any damage clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
Remove the front seat belt lower anchor.
Remove the front door scuff trim.
Remove the rear door scuff trim.
Remove the center lower pillar trim (A).
Installation is the reverse of removal.
Replace any damage clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
Remove the center lower pillar trim.
Remove the center upper pillar trim (A).
Installation is the reverse of removal.
Replace any damage clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
Remove the rear pillar lower trim (A)
Remove the rear pillar upper trim (B).
Installation is the reverse of removal.
Replace any damage clips.
