1.
Loosen the radiator upper cover mounting clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not bend or scratch the cover and other parts.
Loosen the radiator upper cover mounting clips.
Remove the mounting clips.
After loosening the front bumper side’s mounting screw, then disconnect the side’s.
Push the lock pin, disconnect the fog lamp connector (A).
Remove the front bumper.
Installation is the reverse of removal.
Make sure the connector is plugged in properly.
Replace any damage clips.
Remove the front bumper cover.
Remove the headlamp washer nozzle tube (A).
Loosen the front bumper rail mounting bolts and nuts.
Remove the front bumper rail (B).
Installation is the reverse of removal.
