Disconnect the negative (-) battery terminal.

Remove the crash pad center ganish(A).

Remove the crash pad side cover(B).

Losening the screw then, remove the lower panel(A).

Loowen the screw. Remove the center facia pannel (A) and then disconnect the connectors.

Remove the heater ＆ A/C controller (A) after loosening 4 screws.

Installation is the reverse order of removal.

Disconnect the negative (-) battery terminal.

Remove the crash pad center ganish(A).

Remove the crash pad side cover(B).

Remove the cresh pad lower panel(A).

Loosen the screw. Remove the center facia pannel(B) and then disconnect the connectors.

Remove the heater ＆ A/C controller (A) after loosening 4 screws.

Installation is the reverse order of removal.