Remove the lower panel, after loosening the parking lever (Refer to BD Gr. 'Crash pad')

Remove the parking brake mounting bolt(A) and the wire(B).

Remove the floor console (Refer to BD Gr. 'Console').

Remove the parking brake wire by removing the adjusting nut(A).

Raise the front of the vehicle, and make sure it is securely supported.

Remove the rear wheel and tire from the rear hub.

Remove the caliper assembly from the carrier and suspend it with wire.

Remove the brake disk and the rear axle hub (Refer to DS Gr. 'Rear axle')

While fastening the spring, remove the shoe hold down pin(A) and spring(B).

Remove the adjuster assembly(A) and the lower return spring(B).

Remove the strut assembly(C).

Remove the retaining ring(B) from the parking brake wire(A) which is in the rear side of the backing plate.

Remove the parking brake wire connecting hook(C) from the brake shoe.