10624431

Check A/C relay component resistance

(1)

IG KEY "OFF", ENGINE "OFF".

(2)

Disconnect A/C relay.

(3)

Measure the resistance between coil power terminal and coil control terminal of A/C relay coil.

Specification : 85±5 Ω (20°C)

(4)

Is the measured resistance within the specification?

	▶ Go to "2. Check A/C relay component operation" as follows.
	▶ Replace A/C relay and go to "Verification of Vehicle Repair".

Check A/C relay component operation

(1)

IG KEY "OFF", ENGINE "OFF".

(2)

Disconnect A/C relay.

(3)

Supplies random B+ and ground to coil sides of A/C relay. ( Coil power terminal, Coil control terminal)

(4)

Check continuity between power input terminal and power output terminal of A/C relay.

Specification : When power is supplied : Continuity ( below 1.0Ω )

When power is not supplied : Discontinuity ( Infinite Ω )

(5)

Is the continuity test within the specification?

	▶ Go to "Verification of Vehicle Repair".
	▶ Replace A/C relay and go to "Verification of Vehicle Repair".

※ Repeat this process 2~3 times.